Red Fuzz 
Bill of Materials
   From:  Guitar Effects Projects
Revison:  2004JAN11

Resistors (1/4 watt rating)
1 - 2K2 (2.2k)
1 - 1k8 (1.8k)
2 - 10k 
2 - 470k
2 - 1M

Pots  (1/4 watt rating)
1 - 100k linear    (Tone)
1 - 100k log       (Volume)
1 - 1M   log       (Intensity)
    Note: original schematic shows Intensity as 1M linear,
          but I think the rotation is better with log.
 
Capacitors (minimum 16 volt rating)
2 - 0.1uF     film
1 - 0.22uF    film
1 - 0.0033uF  film or ceramic
1 - 0.047uF   film or ceramic
1 - 0.001uF   film or ceramic
1 - 10uF     aluminum electrolytic

Op Amp
1 - LF351


Transistors
1 - 2N5457 or J201 FET Transistor
    you can use BF245C, but you must fit the pins to the 
    layout footprint.

Other
2 - red LEDs
1 - 8 pin op amp socket (optional)
1 - stereo open quarter inch jack
1 - mono quarter inch jack
9v battery snaps & holder and/or DC jack
1 - DPDT heavy duty footswitch or 3PDT footswitch
    optional LED and limiting resistor (4k7) if using 3PDT
Copper-clad board, etchant, 24 gauge stranded wire
Enclosure

Copyright 2004  JD Sleep
http://www.generalguitargadgets.com