Hot Box 
Build Instructions
    From:  Guitar Effects Projects
Revision:  2000/07/05

You will need to decide whether you are going to build this a a stompbox
or as a rack type effect.  You may want to add true bypass switching
which isn't shown in the schematic.

1 - Find an Enclosure. The enclosure should be cast aluminum 
    or steel.

2 - Punch the chassis for the tube sockets.

3 - Drill the holes in the enclosure for the transformer, jacks, pots 
    and switches.

4 - Paint and label the enclosure.  You can do this step any time after
    the enclosure has been drilled. Give it a few days to cure, before
    you get a wrench close to it.

4 - Build up the board using the wiring diagram as a reference.  The layout
    is designed for turret board or eyelet board.

5 - Wire up the transformer, tube sockets, pots and switches.

6.  Email the Guitar Effects Projects site host and let us know everything
    about your experience of building this project.


Copyright 2000  JD Sleep
Guitar Effects Projects @ http://ampage.org/guitareffectsprojects