This is the Fuzz Face project know as FF5, the "5" denotes that there are at least 5 different versions that you can build with this project. Here are the Fuzz Face versions that can be built on the PCB for this project:
Please Note: For a simple project, we recommend the "NPN Silicon Transistor Version". If you want to build a germanium transistor version, get your transistor set from Small Bear Electronics LLC and use the resistor values that he sends with the transistors. His resistor designations (R2, etc) are not the same as the designations on these projects. Here is the cross reference:
If you have a common power supply to power your pedals, the negative ground version will work with your other pedals on a common power supply.
Please Note (addtionally): The "Germanium Transistor" version and The "Silicon Transistor" version layouts both have a 10k trimmer (R5T) that is not shown in the schematic. We believe this is a worthy addition to the circuits, giving you more options for the ultimate sound you want. If you don't want to use the trimmer, here is the Fuzz Face, No Trimmer Diagram mentioned in the Instructions file. This diagram is for the "Germanium Transistor" version, but the jumper is the same for the "Silicon Transistor" version.
Common Files For All Versions
Fuzz Face Germanium Transistor Version
Fuzz Face Silicon Transistor Version
Easy Face (Joe Gagan's) Version
Boutique Late 60's Fuzz Face Version
Boutique Early 70's Fuzz Face Version
Fuzz Face PNP Germanium Transistor With Charge Pump Version
The addition of a charge pump on the input power, gives you the ability to daisy chain power to your PNP Positive ground pedal with all your other negative ground pedals! Eliminate any need for special considerations when powering your Fuzz Face with the other pedals on your pedal board.
Buy a FF5 Complete Kit. Includes all the parts and materials you need to build one, all for about the price you would pay for a PCB and parts.
Would you like a Ready to Solder Circuit Board for this project? Note: If you buy the kit, the Ready-to-Solder Printed Circuit Board (RTS PCB) is included in the kit. You do not need to purchase this Ready to Solder Circuit Printed Board if you buy the kit.